Switching The Upper Part Display; Switching The Lower Part Display - Kenwood KDC-PS9018R Instruction Manual

General features

Switching the Upper Part Display

This function switches the type of information on the upper
part display when the display mode is vertical division display.
Each time you press the DISP button, the upper part display
changes as follows:
In Tuner mode:
Program Service name (only during RDS station reception)
Station frequency
Radio text (only during RDS station reception)
Displaying Frequencies during program service name display:
Press the DISP button for at least one second.
The frequency for the RDS station will be displayed for five
seconds instead of the station name.
NOTE
If the RDS station currently tuned to is transmitting no text
while the Radio Text Display mode is turned on, "NO TEXT"
will appear in the display. While awaiting reception, "Waiting"
will be displayed.
2WARNING
To prevent accidents, drivers should not look at the display
while on the road.
In CD/External disc control mode:
Track Time
Disc name (DNPS)(only when being preset)
Disc Title (Units featuring CD text/MD only)
Track Title (Units featuring CD text/MD only)
NOTE
• You can give names to discs through the presetting disc
name function (page 28).
Note that depending on the unit, display may not be possible.
• If you try to display the name of a disc that doesn't have one,
"NO NAME" is displayed instead.
• When there is an attempt to display the title of a disc for
which the disc title/track title has not been recorded, "NO
TEXT" is displayed for CD and "NO TITLE/NO NAME" is
displayed for MD.
• If you attempt to display disc title/track title when connecting
/
the CD changer not supported for CD text feature, caution
messages such as "NO TEXT" or "Reading" may be displayed.
• Depending on the type of characters of the CD Text, some
characters may not be displayable.
NOTE
• Please see the menu settings about selecting the display mode.
For details refer to the Switching Display Mode page for the
menu settings. (page 31)
• The same items cannot be selected for both the upper part and
the lower part.

Switching the Lower Part Display

This function switches the type of information on the lower
part display when the display mode is vertical division display.
Each time you press the CLK button, the lower part display
changes as follows:
In Tuner mode:
Spectrum Analyzer1
Spectrum Analyzer2 + Clock
Date + Function indicator
Radio text + Function indicator
(only during RDS station reception)
— 10 —