Faceplate Angle Adjustment; Switching Full-Screen Display - Kenwood KDC-PS9018R Instruction Manual

Faceplate Angle Adjustment

You can adjust the faceplate angle for easy viewing.
Sliding the faceplate:
Press the ANG button for at least one second.
NOTE
Do not apply excessive force to the faceplate under setting 2.

Switching Full-Screen Display

This function switches the type of information on the display
in the full screen display mode.
Each time you press the CLK button, the full screen display
changes as follows:
In Source mode:
Demonstration
Spectrum Analyzer 1
Spectrum Analyzer 2
Spectrum Analyzer 3
Spectrum Analyzer 4
In Stand by mode:
Demonstration
Date + Clock + Function indicator
"ALL OFF"
NOTE
Please see the menu settings about selecting the display mode.
For details refer to the Switching Display Mode page for the
menu settings. (page 31)
— 9 —