Disc Name Preset Play (Dnpp) - Kenwood KDC-PS9018R Instruction Manual

CD/External disc control features

Disc Name Preset Play (DNPP)

If you have preset the name of a disc that you want to listen to
in the disc changer, you can look for it by name and start
playing it.
1
Press the DNPP button on the remote.
"DNPP" will appear in the display, and the disc name preset
play mode is entered.
The names of all the discs in the disc changer will appear
successively in the display for five seconds each.
Discs whose names have not been preset will appear as "NO
NAME" in the display.
NOTE
• This function can only be used in disc changers that were
manufactured or sold as of 1997. Also note that some units
cannot provide a display unless the disc name preset has been
made by the unit that is playing.
• Discs in the disc changer that have never been played before
will appear as "NO ACCESS" when the disc names are
displayed. When you cannot identify a disc because of the "NO
ACCESS" display after inserting a disc magazine, try playing it to
display the disc name. Also note that "NO DISC" will be
displayed when a disc has not been loaded.
Rapid display (forward / reverse):
+
–
Press the DISC or DISC
+
Pressing the DISC button will rapidly display the preset
names/disc titles in order.
–
Pressing the DISC button will rapidly display the preset
names/disc titles in reverse order.
2
When the name appears for the disc you want to play
Press the OK button.
The disc whose name is displayed will be recalled, and the disc
name preset play (DNPP) mode will end.
To cancel DNPP mode:
Press the DNPP button.
The disc name preset play (DNPP) mode will be canceled.
(Function of Remote)
button.
— 30 —