Dsi (Disabled System Indicator); Selectable Illumination; Contrast Adjustment; News Bulletin With Timeout Setting - Kenwood KDC-M4524G Instruction Manual

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves.
Display
"DSI ON"
"DSI OFF"

Selectable Illumination

Selecting the button illumination color as green or red.
Display Setting
"Button Red" The illumination color is red
"Button Green" The illumination color is green.

Contrast Adjustment

Adjusting the display contrast.
Display and Setting
"Contrast 0"
"Contrast 5" (Original setting)
"Contrast 10"

News Bulletin with Timeout Setting

It switches automatically when a news bulletin starts even if the
Setting
LED flashes.
LED OFF.
— 23 —
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
Display and Setting
"NEWS OFF"
"NEWS 00MIN"
"NEWS 90MIN"
When "NEWS 00MIN" — "NEWS 90MIN" is set, the News
Bulletin Interrupt function is ON.
When the news bulletin starts, "News" is displayed, and it
switches to the news bulletin.
• If you choose the "20MIN" setting, further news bulletins will not
be received for 20 minutes once the first news bulletin is received.
• The news bulletin volume is the same level that was set for
<Traffic Information> (page 14).
• This function is only available if the desired station sends PTY-code
for news bulletin or belongs to <Enhanced Other Network>-
Network sending PTY-code for news bulletin.
• When the News Bulletin Interrupt function is ON, it switches to an
FM station.

Local Seek

Only stations whose reception is good are searched for in auto
seek tuning.
Display
"Local.S OFF"
"Local.S ON"
<In Tuner mode>
Setting
The local seek function is OFF.
The local seek function is ON.