Speaker Set Up - Kenwood DDX8032BT Instruction Manual

When the speaker type and size are set, the
speaker crossover network and equalizer curve
are set automatically.
5
10
7
5 Selects a speaker to be set.
(see <Speaker Set Up>, page 61)
6 Sets the use or no use of tweeter.
(see <Speaker Set Up>, page 61)
7 Selects a speaker type.
(see <Speaker Set Up>, page 61)
8 Displays the Speaker Crossover Setup
screen.
(See <Crossover Network Setup>, page 63)
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.
9 Displays the Channel Level Setup screen.
p Displays the Car Type Set Up screen.
q Returns to the "Setup Menu" screen.
12
15
14
w Selects a speaker to be set.
(see <Channel Level>, page 62)
e Sets the speaker volume.
(see <Channel Level>, page 62)
r Starts or stops test signal tone output for
setup check.
t Displays the Speaker Set Up screen.
y Returns to the "Setup Menu" screen.
9
6
7
8
11
13
16

Speaker Set Up

You can select a speaker type and its size to get
the best sound effects.
1 Select a speaker you wish to adjust
1
2
2
3
3
4
1 Center speaker
2 Front speaker
3 Rear speaker
4 Subwoofer
5 Tweeter setup
You can set the tweeter when you are
selecting front speakers.
If you are using a tweeter together with the
front speakers, set the tweeter to "Use". In
the "Use" position, the Equalizer is adjusted
to its best position.
2 Select a speaker type
You can select any of the following speaker types.
Center speaker:
NONE, 40mm x 70mm, 5cm, 10cm, 13cm,
16 cm over
Front speakers:
OEM, 10cm, 13cm, 16cm, 17cm, 18cm,
4x6 inches, 5x7 inches, 6x8 inches, 6x9 inches,
7x10 inches
Rear speakers:
NONE, OEM, 10cm, 13cm, 16cm, 17cm, 18cm,
4x6inches, 5x7inches, 6x8 inches,
6x9 inches, 7x10 inches
5
Next page 3
English 61