EXT SW Setup
Setting up power specification of the external
device for which the power is controlled from
Display the EXT SW SETUP screen
Menu" screen (page 60).
Perform EXT SW Setup
Setting EXT SW Control 1 (EXT SW1)
1 Sets the name of the external device. See
<Character Entry> (page 46) for information
on how to enter the name.
2 Sets the power signal output mode.
EXT SW1: Pulse, EXT SW2: Level)
Pulse: Generates a single power signal
Level: Continues output of high power
Sets to turn output on/off each time the
button on the EXT SW Control screen is
3 Sets the Pulse signal output time.
Outputs 500ms when "1" is set. Increases
by 200ms with each step. Up to 100 steps
can be set.
4 Returns to the original screen.
in the "SETUP
Setting EXT SW Control 2 (EXT SW2)
The setup method is the same as "EXT SW1".