Contents Before Use ............ 4 TV/ Video Control ........36 Displaying the TV Picture screen Notes on playing MP3/WMA/JPEG/MPEG .. 6 Displaying the Easy Control Panel Displaying the TV Control screen DDX8027 Basic operation ......8 Displaying the TV Menu screen Basic Operations of Remote Controller ...
Page 3
DVD Setup ..............58 Zone Control ............90 Displaying the DVD SETUP 1 screen Displaying the Zone Control screen Displaying the DVD SETUP 2 screen Glossary ............91 Displaying the DVD SETUP 3 screen Language Setup Troubleshooting Guide ......92 Parental Level Setup Specifications ..........
In such a situation, remove the disc and wait for the Normal brightness will return after using the monitor for a condensation to evaporate. If the unit still does not operate whilst. normally after a whilst, consult your Kenwood dealer. English...
Page 5
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. Icons on the DVD discs Icon Description Indicates the region code where the disc can be played. Number of voice languages recorded with the audio function.
Notes on playing MP3/WMA/JPEG/MPEG This unit can play MP3 (MPEG1 Audio Layer 3)/ WMA/JPEG/MPEG (MPEG 1/MPEG 2). Note, however, • Play mode may not be possible when portions of the functions that the MP3/WMA/JPEG/MPEG recording media of Windows Media Player 9 or higher are used. and formats acceptable are limited.
Page 7
MP3/WMA/JPEG/MPEG playing order When selected for play, Folder Search, File Search, or for Folder Select, files and folders are accessed in the order in which they were written by the CD/DVD writer. Because of this, the order in which they are expected to be played may not match the order in which they are actually played.
DDX8027 Basic operations 1 Play Disc 3 Eject Disc [Disc insertion slot] [EJECT] key A disc is played when you insert it. The disc is ejected. 2 Play/Pause [38] key Pauses and replays a disc. English...
4 Video Source Selection 8 Attenuator [V.SEL] key [ATT] key Video source selection changes in the following order Attenuates the volume. each time you press the key. Press it again to cancel muting. 9 Traffic Information [TI] key DVD/VCD Turns the Traffic Information function On or Off. (page TV */ Video p Screen Setup/Dimmer R-CAM *...
Basic Operations of Remote Controller ENTER ENTER CANCEL CANCEL MENU MENU RETURN RETURN – – BAND BAND ZOOM ZOOM ¢ ¢ ZOOM ZOOM POSITION POSITION MODE ROUTEM VIEW 1 . ? & 2 ABC 3 DEF MENU ZOOM TOP MENU AUDIO MAPDIR VOICE...
Page 11
6 [BAND] key (When 1 is set to "DVD" or "AUD") Jumps to the function registered in Shortcut 2. DISC +: Selects next disc. w [2-ZONE] key –: Selects previous disc. (When 1 is set to "TV" or "AUD") DISC TUNER Turns Zone function on or off each time you press BAND: Switches to TV1, TV2, VIDEO1, or VIDEO2.
Page 12
Basic Operations of Remote Controller o [0] – [9] key [ ]/[ ] key (When 1 is set to "TV") (When 1 is set to "DVD") (When 1 is set to "AUD") TUNER : Slow Backward. — : Recall the stations on memory. : Slow Forward.
About discs Handling discs Removing discs • Do not touch the recording surface of the disc. When removing discs from this unit pull them out horizontally. Discs that can not be used • Discs that are not round can not be used. •...
Switching Screen Mode The Screen mode of the monitor changes each time the [MODE] key is pressed. [MODE] key Full picture mode (FULL) Justify picture mode (JUST) Cinema picture mode (CINEMA) Zoom picture mode (ZOOM) Normal picture mode (NORMAL) • When you select the Menu, Easy Control screen, or Navigation, the display is shown in the full-size display mode automatically. The screen mode of these displays cannot be changed.
Muting Audio Volume upon Reception of Phone call Muting Audio Volume upon Reception of Phone call When the telephone is called, the system is paused automatically. When the telephone is called... The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen MENU MENU...
Controlling during DVD Video, Video CD, JPEG or MPEG Playback Various control screens appear when you play back a DVD Video (DVD), a Video CD (VCD) disc or a JPEG, a MPEG files. Displaying the DVD/VCD/JPEG/MPEG Playback screen 1 Title Number Display You can use the following operations when 2 Chapter Number Display displaying DVD/VCD/JPEG/MPEG images.
JPEG/MPEG playback screen e Folder/File Number Display P 0:01:48 DVD MEDIA r Forword File Search Area Mode: FULL AVOUT: Selects the next folder or file. t Backword File Search Area Selects the previous folder or file. y Picture Control Button Area (page 21) JPEG playback only.
Title 1 Chap T 0:05:20 x Slow Forwards or Backwards. 13:50 KENWOOD c Turns the PBC function of VCD On or Off. (only when VDC Ver 2.0 is in use) v Switches the Repeat Play operations in the following sequence.
Page 19
Control during DVD Video, Video CD, JPEG or MPEG Playback English...
Menu screen. When you touch a chapter and title, it is played back. Zoom Control DVD Disc Menu Control Buttons Area (page 16) [ Highlight On ] DVD Menu DVD Menu 1. KENWOOD 1. KENWOOD 2. KENWOOD 2. KENWOOD Zoom Cancel Exit 3. KENWOOD 3.
Control during DVD Video, Video CD, JPEG or MPEG Playback VCD Zoom Control Information Display Displays an enlarged VCD screen. Displays the DVD and AV information. Display the Zoom Control screen Information Display Button Area (page 16,17) Zoom Control Button Area (page 16) The information is displayed for 5 seconds.
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control You can call various control screens during CD/MP3/WMA/JPEG/MPEG/Disc Changer playback. Displaying the Easy Control Panel 1 Switches the source. The CD/MP3/WMA/JPEG/MPEG/Disc Changer Play 2 Stops to play the built-in disc player. Control Panel is displayed in a floating position of the selected picture.
Displaying the CD/MP3/WMA/JPEG/ MPEG/Disc Changer Control screen During CD playback You can play the CD/MP3/WMA/JPEG/MPEG/Disc 8 Calls the CD/MP3/WMA/JPEG/MPEG/Disc Changer changer using various functions. Menu. 9 Calls the Sound Effects Menu. (page 80) p Displays the Source Select screen. (page 49) q Calls the Setup Menu.
Page 24
MP3/WMA/JPEG/MPEG Control screen During MP3/WMA/JPEG/MPEG play MENU k Ejects a disc. l Fast Forwards or Fast Backwards. ( Disabled when a JPEG is being played.) Direct DVD MEDIA DVD MEDIA / Stops to play. Folder Folder Next When pressed twice, the disc is played back from DISP SCRL its beginning in the next time.
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control Disc Changer Control screen During play by the disc changer MENU Y Selects a track. Disc Starts Fast Forward or Fast Backward when it is held down. Direct U Selects a disc. CD-CH Disc Next I Plays or pauses. DISP SCRL TIME...
Displaying the CD/MP3/WMA/JPEG/ MPEG Disc Changer Menu screen Selects options from various function menus. You can select menu options using various Returns to the CD/MP3/WMA/JPEG/MPEG/Disc functions. Changer Control screen. MENU • The available functions vary depending on the source used. CD Menu screen MENU MENU...
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control Set Disc Name Select Folder (during MP3/WMA/JPEG/ MPEG play) Names a CD. The folders of an MP3/WMA/JPEG/MPEG disc are Play a CD you wish to name listed for quick search. Call the CD/Disc Changer Menu Call the MP3/WMA/JPEG/MPEG Menu MENU MENU Select the Set Name mode...
Call the MP3/WMA/JPEG/MPEG Menu Call the Disc Changer Menu MENU MENU Display the ID3/WMA TAG Call the Disc Select Menu Infomation CH Disc Select MENU MENU Title: 1.KENWOOD KENWOOD 2.KENWOOD DISP Artist: KENWOOD 3.KENWOOD Album: 4.KENWOOD DISC CH KENWOOD 5.KENWOOD 6.KENWOOD...
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control Direct Search Searches for a disc or a track when its number is entered. During play on the built-in disc player Select the Direct Search mode # BS DIRECT The following items can be searched directly each time it is pressed.
Tuner Control Various control screens appear in the Tuner Source mode. Displaying the Easy Control Panel 1 Switches the source. The Tuner Control Panel is displayed in a floating 2 Switches the band (to AM or FM1/2/3). position of the selected picture. 3 Tunes in a station.
i Turns the Local seek function On or Off. o When buttons appear, you can recall the stations on memory. For memory of broadcasting stations, see <Auto Memory> (page 32) or <Manual Memory> (page 32). ; Indicates current Seek mode. a Clock Display When touched, the display of Clock 1, Clock 2, and Clock 3 are switched one after the other.
Seek Mode Manual Memory Sets a station selection. Stores the current receiving station in memory. Select a station you wish to store in memory SEEK is not shown, touch SEEK Next The mode is switched in following order each time Store in memory you touch the button.
Tuner Control Preset Select Lists and tunes in stations in memory one after the other. Call the Tuner Menu MENU Call the Preset Select Menu Preset Select P1 87.9 MHz MENU P2 90.1 MHz P3 98.1 MHz P4 87.9 MHz P5 87.9 MHz P6 87.9 MHz FM 1...
Direct Search Traffic Information Tunes in a station when its frequency is entered. When a traffic bulletin starts, any source is switched to the traffic information and it is displayed Select a band automatically. – BAND When the traffic bulletin starts... The Traffic Information screen appears automatically.
Tuner Control Search for Program Type Radio Text A program is tuned when you set its program type. You can display the radio text. (Only when receiving (Only when receiving the FM broad cast.) the FM broad cast.) Call the Tuner Menu Call the Tuner Menu MENU MENU...
TV/ Video Control Various control screens appear in the TV/ Video Source mode. (You can only operate TV with the optional accessory TV Tuner connected.). Displaying the TV Picture screen 1 TV Band Number Display Various control screens appear in the TV Source 2 TV Area Group Display (page 74) mode.
Displaying the TV Control screen r Calls the TV Menu. You can tune in a TV station using various t Calls the Sound Effects Menu. (page 80) functions. y Displays the Source Select screen. (page 49) u Calls the Setup Menu. (page 51) i Switches to VIDEO1 or VIDEO2.
Displaying the TV Menu screen l Selects options from various function menus. You can select menu options using various / Returns to the TV Control screen. functions. MENU TV Menu screen MENU MENU Preset Select Name Set English...
Before Use TV/ Video Control Seek Mode Auto Memory Sets a TV station selection. Stores stations with good reception in memory automatically. SEEK Select a band you wish to store in memory is not shown, touch SEEK Next The mode is switched in following order each time you touch the button.
Before Use Manual Memory Preset Select Stores the current receiving channel in memory. Lists and tunes in stations in memory one after the other. Select a channel you wish to store in memory Call the TV Menu (Page 37 r) MENU Store in memory Call the Preset Select Menu...
TV/ Video Control Set Station Name Names a station. Select a station you wish to name Call the TV Menu (Page 37 r) MENU Select the Set Name mode Name Set Enter a name For character entry details, see <Character Entry> (page 48).
DAB Tuner control Various control screens appear in the DAB Tuner source mode. (with the optional accessory SIRIUS Tuner connected only) Displaying the Easy Control Panel 1 Switches the source. The DAB Tuner Control Panel is displayed in a 2 Switches the band (to DAB1/2/3). floating position of the selected picture.
i When buttons appear, you can recall a service on memory. o Indicates current Seek mode ; Clock Display When touched, the display of Clock 1, Clock 2, and Clock 3 are switched one after the other. Displaying the DAB Tuner Menu screen a Selects options from various function menus.
Seek Mode Service Preset Memory A service selection method can be set. The current receiving service is stored in memory. Select a service you wish to store in memory SEEK Band Service Service is not shown, touch SEEK Next The mode is switched in following order each time Store in memory you touch the button.
DAB Tuner control Service Select Language Filter The service list of the currently receiving ensemble The languages are list for your selection. is displayed for your selection. Call the DAB Tuner Menu Call the DAB Tuner Menu MENU MENU Call the Language Filter Menu Call the Service Select Menu Language Filter Service Select...
Search for Program Type Select a program type The services are received when you set its program type. Call the DAB Tuner Menu Select a Language 1. Display the Language select screen MENU LANG Call the PTY Search Menu MENU PTY Search News SRCH...
DAB Tuner control DAB Information DAB Announcement The DAB information is displayed. When the Announcement you have turned on starts, any source is switched to the Announcement Call the DAB Tuner Menu automatically. When the announcement starts... MENU The Announcement screen appears automatically. Display the DAB Information screen Announcement screen MENU...
Character Entry How To Use the Character Entry screen 1 Shifts the cursor. When you select the Set Disc Name mode or 2 Enters a space. others, the following screen appears for character If you erase a character, locate the cursor on it and entry.
SCRL TIME Title 1 Chap T 0:05:20 13:50 KENWOOD Displaying the Source Select screen 1 Select the source. 2 Returns to the Control screen previously displayed. Direct 3 Calls the Sound Effects Menu. (page 80) 4 Calls the Setup Menu. (page 51)
Adjusting the Monitor Display Position and Quality You can adjust the position and picture quality of the monitor. Displaying the Screen Control screen 1 Brightness Control You can adjust the picture quality using the 2 Tint Control following keys. Displayed for an NTSC system image on TV or Video.
TIME Title 1 Chap T 0:05:20 13:50 KENWOOD Displaying the Setup Menu screen 1 Scrolls the Setup Menu. 2 Calls each Setup Menu. 3 Calls the Sound Effects Menu. (page 80) 4 Returns to the Control screen of the previous Setup Menu screen source.
Control during DVD Video, DVD Audio or Video CD Playback Audio Set Up (Other than STANDBY mode) You can set up the car type and speaker system you use together with this unit. Displaying the Car Type Set Up screen 1 Returns to the Control screen of the previous If your car type is selected, the Digital Time source.
Before Use Setup Menu Displaying the Channel Level screen e Selects a speaker to be set. You can set the volume at each setup position. (see <Channel Level>, page 55) r Sets the speaker volume. (see <Channel Level>, page 55) t Starts or stops test signal tone output for setup Channel Level screen check.
Speaker Set Up Select a speaker type You can select a speaker type and its size to get the best sound effects. Select a speaker you wish to adjust You can select any of the following speaker types. (Page 52 7) Center speaker: NONE, 40mm x 70mm, 5cm, 10cm, 13cm, Speaker Set Up screen...
Before Use Setup Menu Channel Level You can set the volume at each setup position. Select a speaker you wish to adjust (Page 65 e) Channel Level setup screen MENU Test Front Right +8 dB Channel Level 1 Center speaker 2 Left front speaker 3 Right front speaker 4 Left rear speaker...
Before Use DTA Setup Set a delay time You can manually set the sound output timing of each channel. Display the DTA Setup screen The speakers are virtually moved to the desired distance. (Page 52 5) When the values of center speaker and front speakers increase, they are virtually moved forward.
Before Use Setup Menu Crossover Network Setup You can manually set a crossover frequency of speakers. (Page 52 9) X'Over X'Over Subwoofer 100Hz 1kHz Frequency Phase Phase Normal Normal 80 Hz Slope 12dB/Oct Return 1 Sets a crossover frequency. 2 Sets a crossover slope. 3 Returns to the Speaker Set Up screen.
Before Use DVD Setup You can set up the DVD play. Displaying the DVD SETUP 1 screen 1 Returns to the Control screen of the previous source. 2 Calls the Sound Effects Menu. (page 80) DVD SETUP 3 Calls the Setup Menu. DVD SETUP 1 screen 4 Selects a disc menu language.* (See <Language Setup>, page 60)
Before Use Setup Menu Displaying the DVD SETUP 2 screen 9 Displays the Parental Lock screen.* OFF) (See <Parental Level Setup>, page 61) p Sets an angle mark display. ( q Selects the screen display mode.* 16:9) "16:9": Displays wide pictures. DVD SETUP 2 screen "4:3 (LB)": Displays wide pictures in the Letter Box format (having black stripes at the top...
Language Setup Abbreviation Language Abbreviation Language Latvian, Lettish Afar Selects a language you use for the speech and Malagasy Abkhazian Maori Afrikaans menus. Macedonian Amharic Malayalam Arabic Display the Language Setup screen Mongolian Assamese Moldavian Aymara See <Displaying the DVD SETUP 1 screen> (page Marathi Azerbaijani 58) and select a language you wish to use.
Before Use Setup Menu Parental Level Setup Display the Parental Level Setup screen Sets a parental level. Enter Display the Parental Level code number screen Return (Page 59 9) Parental Pass Cancel Level 5 Level 5 1 Sets a parental level. Enter Clear 2 Returns to the DVD SETUP 2 screen.
System Setup You can set up the system parameters. Displaying the System 1 screen 1 Returns to the Control screen of the previous source. 2 Calls the Sound Effects Menu. (page 80) System Set Up 3 Calls the Setup Menu. System 1 screen 4 Turns the key touch tone On or Off.
Setup Menu Displaying the System 2 screen 8 Sets a music CD playback. ( "1": Automatically recognizes and plays back an MP3/WMA disc, a DVD or a music CD. "2": Forcibly plays back a disc as a music CD. Select "2" if you wish to play a music CD System 2 screen having a special format or if you cannot play a disc in the "1"...
3 Calls the Setup Menu. AV I/F 1 screen 4 Selects a navigation system connection. ( RGB) "RGB": Allows the Kenwood’s Navigation System MENU Navigation to connect via its interface cable. "AV-IN1": Allows a third-party navigation system to AV-IN1 Name connect via the AV INPUT1 port.
Before Use Setup Menu Displaying the AV I/F 2 screen 9 Sets a method to switch to the rear view camera video display. ( Off) "On": Switches to the the rear view camera video display when engaging the shift knob of car to "Reverse".
Control during DVD Video, DVD Audio or Video CD Playback User Interface You can set up user interface (IF) parameters. Displaying the User I/F 1 screen 1 Returns to the Control screen of the previous source. 2 Calls the Sound Effects Menu. (page 80) User Interface 3 Calls the Setup Menu.
Setup Menu w Sets an on-screen display of the TV screen. Auto) (when the optional accessory TV tuner in connected only) "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. (page 36) e Displays the User I/F 1 screen.
Touch Panel Adjustment Adjust the positions You can adjust the touch panel operations. Display the Touch Panel Adjust screen Touch the center of left lower and right upper when requested. Touch is not shown, touch Touch Prev. to display it. Next MENU Touch Panel Adjust...
Setup Menu Clock You can adjust the clock time. Display the Clock screen Clock is not shown, touch Clock Prev. to display it. Next MENU 13:50 Reset RDS Synchronize Clock 1 Returns to the Control screen of the previous source. 2 Calls the Sound Effects Menu.
Before Use Security Code Setup Start the security code registration You can set a security code to protect your receiver system against theft. PassWord Cancel • When the Security Code function is activated it cannot be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport"...
Page 71
Before Use Setup Menu If you have pressed the Reset button or if you have disconnected the Receiver from battery... Enter the correct security code — You must enter the same security code as that you have entered in Step 3 above. Enter the security code Enter Now, you can use your Receiver.
1 Recalls the memorized settings. Set Up Memory 2 Memorizes the current Audio Set Up and AV Audio Set Up and AV Interface settings can be Interface settings. memorized. The memorized settings can be recalled 3 Clears the currently memorized settings. at any time.
TV Setup The TV signal receiving areas can be set. (with the optional accessory TV Tuner connected only) Displaying the TV1 Area Set Up screen 1 Returns to the Control screen of the previous source. 2 Calls the Sound Effects Menu. (page 80) TV Set Up 3 Calls the Setup Menu.
Setup Menu RDS Setup The related RDS parameters can be set. Displaying the RDS Set Up1 screen 1 Returns to the Control screen of the previous source. 2 Calls the Sound Effects Menu. (page 80) RDS Set Up 3 Calls the Setup Menu. RDS Set Up1 screen 4 Sets a news bulletin interrupt time.
DAB Set Up You can set the DAB reception. (only with the optional accessory DAB Tuner connected) Displaying the DAB Set Up screen 1 Calls the Sound Effects Menu. (page 80) 2 Returns to the Control screen of the previous source.
Setup Menu Announcement Selection Set the announcement parameters You can set various announcement reception Traffic News — Financial News parameters. Display the Announcement Selection screen Traffic News Event Transport News Special Event Warning Radio Info News Sports News Traffic News Event Transport News Special Event...
AMP Control Sets the power amp connected via the LX bus. (with the optional accessory LX Power Amp connected only) Displaying the AMP Control screen 1 Calls the Setup Menu. 2 Calls the Sound Effects Menu. (page 80) 3 Returns to the Control screen of the previous source.
Direct SCRL TIME Title 1 Chap T 0:05:20 13:50 KENWOOD Displaying the Sound Effects Menu screen 1 Calls the Sound Effects Menu. 2 Calls the Setup Menu. (page 51) 3 Returns to the Control screen of the previous source. Sound Effects screen...
Before Use Audio Control You can adjust the front/rear and right/left audio balance. Displaying the Audio Control screen 1 Returns to the Control screen of the previous source. 2 Calls the Setup Menu. (page 51) Audio Control 3 Calls the Sound Effects Menu. Audio Control screen 4 Adjusts the right and left volume balance.
Equalizer You can set up the equalizer. Displaying the Equalizer screen 1 Returns to the Control screen of the previous source. 2 Calls the Setup Menu. (page 51) Equalizer 3 Calls the Sound Effects Menu. Equalizer screen 4 Adjusts the bass boost of the B.M.S power amplifier (optional accessory).
Sound Effects Menu Parametric Equalizer Set a gain You can Manually set the equalizer curve by adjusting the center frequency, gain and Q value. Display the Parametric Equalizer screen Set a Q value P-EQ Parametric Equalizer Flat Close the Parametric Equalizer screen 80Hz 315Hz 1.6kHz...
Surround Control You can set up the sound field. Displaying the Surround Control screen 1 Returns to the Control screen of the previous source. 2 Calls the Setup Menu. (page 51) Surround Control 3 Calls the Sound Effects Menu. Surround Control screen 4 Sets a sound field.
Sound Effects Menu Surround Control Adjustment • You cannot use the <Surround Control Adjustment> You can adjust the sound field. during playback of a Multi-channel source. Display the Surround Control screen • You cannot use the <Surround Control Adjustment> when the sound field of "Dolby PLII Movie", or "Dolby PLII Matrix"...
SRS WOW Control You can set up the SRS WOW effect. Displaying the SRS WOW Control screen 1 Returns to the Control screen of the previous source. 2 Calls the Setup Menu. (page 51) SRS WOW 3 Calls the Sound Effects Menu. SRS WOW Control screen 4 Sets a SRS WOW.
Sound Effects Menu SRS WOW User Setup Display the SRS WOW Adjust screen Adjust SRS WOW Adjust screen SRS WOW Adjust TruBass 3 FOCUS 5 SRS 3D 1 Return 1 Selects a speaker to be set (Front, Rear or Center speaker).
Position You can adjust the sound effects according to your listening position. Displaying the Position screen 1 Returns to the Control screen of the previous source. 2 Calls the Setup Menu. (page 51) Position 3 Calls the Sound Effects Menu. Position screen 4 Sets a listening position.
Sound Effects Menu 1 Center speaker Position Fine Control 2 Left front speaker You can fine-adjust your listening position. 3 Right front speaker 4 Left rear speaker Display the Position Fine Control screen 5 Right rear speaker 6 Subwoofer Adjust Set a delay time Position Fine Control screen Position Fine Control...
Sound Effects Menu Zone Control You can set the front and rear audio source. Displaying the Zone Control screen 1 Returns to the Control screen of the previous source. 2 Calls the Setup Menu. (page 51) Zone Control 3 Calls the Sound Effects Menu. Zone Control screen 4 Turns the Zone Function (that sets different source sounds for front and rear speakers) On or Off.
Page 91
Glossary DVD: Digital Versatile Disc Title number (DVD) A type of disc which contains recording of audio/ The title is the largest unit of video and audio video packaged media with high video and audio recorded in a DVD. It usually corresponds to a quality, such as a movie, featuring large recording single movie of video software or an album (some- capacity and digital signal processing capability.
Troubleshooting Guide Some system functions are limited to control depending on your setup. • Zone cannot be set. • The "Rear Bass Boost" of Surround Control Adjust cannot be set. The rear speakers have been set to • The rear speakers of DTA cannot be set. "NONE"...
Page 93
What might appear to be a malfunction in your unit may just be the result of slight misopera- tion or miswiring. Before calling service, first check the following table for possible problems. ✔ The parking brake is not engaged. General For safety reasons no television/video images The power does not turn on.
Page 94
Before Use The sound quality is poor or distorted. The voice (or subtitle) language cannot be ✔ One of the speaker wires is being pinched by a changed. ✔ screw in the car. The DVD disc being played does not contain Check the speaker wiring.
Page 95
Before Use Troubleshooting Guide MP3/WMA source The specified disc does not play, but another one plays instead. Cannot play an MP3/WMA. ✔ The specified CD is quite dirty. ✔ The media is scratched or dirty. Clean the CD. Clean the media, referring to the Disc cleaning ✔...
Page 96
Mecha Error The disc player is malfunctioning. ] Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected. Disc Error The unplayable discs is inserted. Read Error The disc is upside-down.
Specifications Specifications subject to change without notice. Monitor Section DSP Section Picture size 4 BAND Parametric equalizer : 6.4 inches (diagonal) wide BAND1 frequency: 60/80/100/120/160/200 Hz 143.6(W)×77.1(H)mm BAND2 frequency: 250/315/400/500/630/800/1k Hz Display system BAND3 frequency: 1.25k/1.6k/2k/2.5k/3.15k/4k Hz : Transparent TN LCD panel BAND4 frequency: 5k/6.3k/8k/10k/12.5k/16k Hz Drive system Gain...
Page 98
Specifications Video section Color system of external video input : NTSC/PAL External video input level (RCA jacks) : 1Vp-p/75Ω External audio max input level (RCA jacks) : 1V/22kΩ Analog RGB input : 0.7Vp-p/75Ω Audio section Maximum Power (Front&Rear) : 50W×4 Output power (Front&Rear) (DIN 45324, +B=14.4V) : 30W×4 Preout level (V)
Page 99
The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.