Audio Set Up; Displaying The Car Type Set Up Screen; Displaying The Speaker Set Up Screen; Displaying The Channel Level Screen - Kenwood DDX7015 Instruction Manual

Setup Menu

Audio Set Up

(with the optional accessory DSP unit connected only)
You can set up more detailed settings by connecting the optional accessory DSP
Displaying the Car Type Set Up
screen
If your vehicle type is selected, the Digital Time
Alignment is set automatically (for timing adjustment of
sound output for each channel) to have the highest
surround effects.
Au d i o S e t U p
Car Type Set Up screen
3
M e n u
D TA
Audio
2
Set Up
C a r Ty p e
4
Sma l l
SRC
1
C a r Ty p e
6
60 English
1 Returns to the Control screen of the previous
source.
2 Calls the Sound Effects Menu. (see page 84)
3 Calls the Setup Menu.
4 Sets up the car type you use together with this unit.
5 Displays the DTA (Digital Time Alignmnet) Setup
screen. (see page 64)
You can adjust the digital time alignment that was
set automatically when you selected the car type.
6 Displays the Speaker Set Up screen.
5
You cannot set up "Car Type" when "Position
4
Setting" (see page 90) is "All".
6
unit.
Displaying the Speaker Set Up
screen
When the speaker type and size are set, the speaker
crossover network and equalizer curve are set
automatically.
Speaker Set Up screen
7
X ' Ov e r HPF
M e n u
Audio 8
X ' Ov e r LPF
Set Up
M u l t i C h a n n e l
10
10
3 / 2
SRC
F r o n t L&R
9 9
S t a n d a r d
11
S u b Woo f e r O f f
Sp e a k e r 12
13
Displaying the Channel Level
screen
You can set the volume at each setup position.
Channel Level screen
14
M e n u
Audio
Set Up
T e s t
16
SRC
Ce n t e r
15 15
+ 1 0 dB
17 C h a n n e l L e v e l
7 Displays the X'over (HPF) screen.
(See <High Pass Filter Setup>, page 64)
You can adjust the crossover setup that was set
automatically when you selected the speaker type.
8 Display the X'over (LPF) screen.
(See <Low Pass Filter Setup>, page 64)
You can adjust the crossover setup that was set
automatically when you selected the speaker type.
9 Sets up the front speaker type to fine-tune for the
optimal equalizer curves.
Standard: Setup for general diameter speakers
Narrow: Setup for small diameter speakers
Middle: Setup for small diameter woofer
Wide: Setup for large diameter woofer
p Select the speakers for Multi-channel sounds.
"3/2": Center speaker, Front speaker, Rear speaker
"2/2": Front speaker, Rear speaker
"3/0": Center speaker, Front speaker
"2/0": Front speaker
q Set the use or no use of Sub Woofer.
w Displays the Channel Level Setup screen.
e Displays the Car Type Set Up screen.
r Selects a speaker to be set.
(see <Channel Level>, page 62)
t Sets the speaker volume.
(see <Channel Level>, page 62)
y Starts or stops test signal tone output for setup
check.
u Displays the Speaker Set Up screen.
• Your setup on the <Sound Effects Menu> is
adjusted automatically to get the best sound
effects according to the car type and speaker you
have set on the <Audio Set Up> (see page 60).
We recommend you to complete the <Audio Set
Up> first, then set up the <Sound Effects
Menu>.
You can fine-adjust the automatic set value by
<DTA Setup> (see page 62), <Crossover
Network Setup> (see page 59), or <Parametric
Equalizer> (see page 88).
• Stop the test signal tone if you have finished
setting up the Channel Level. If you leave the test
signal tone on, you may not be able to set up
other settings.
English 61