Displaying the Speaker Set Up
screen
When the speaker type and size are set, the speaker
crossover network and equalizer curve are set
automatically.
Speaker Set Up screen
9
15
Displaying the Channel Level
screen
You can set the volume at each setup position.
Channel Level screen
19
11
12
10
10
13
14
18
16
+1
+10 dB
17
17
9 Selects a speaker to be set.
(see <Speaker Set Up>, page 62)
p Selects a speaker type.
(see <Speaker Set Up>, page 62)
q Stores your setup in memory.
(see <Speaker Setup Memory>, page 65)
w Displays the Speaker Crossover Setup screen.
(See <Crossover Network Setup>, page 65)
You can adjust the crossover setup that was set
automatically when you selected the speaker type.
e Set the use or no use of tweeter.
(see <Speaker Set Up>, page 62)
r Displays the Channel Level Setup screen.
t Displays the Car Type Set Up screen.
y Selects a speaker to be set.
(see <Channel Level>, page 63)
u Sets the speaker volume.
(see <Channel Level>, page 63)
i Starts or stops test signal tone output for setup
check.
o Displays the Speaker Set Up screen.
Your setup on the <Sound Effects Menu> is
adjusted automatically to get the best sound
effects according to the car type and speaker you
have set on the <Audio Set Up> (see page 60). We
recommend you to complete the <Audio Set Up>
first, then set up the <Sound Effects Menu>.
You can fine-tune the automatic set value by <DTA
Setup> (see page 64), <Crossover Network Setup>
(see page 65), or <Parametric Equalizer> (see page
91).
English 61