3. Remove a mis-fed media in Lower Feeder region by the instruction 3-1 and 3-2.
3-1 Open the Bypass Feeder, Roll Deck 1, Roll Deck 2 and Roll Deck 3.
Bypass Feeder
NOTE
(1) If any of Roll Decks is closed, the Roll Deck would catch the media and keep it from
being pulled out.
(2) Opening the Bypass Feeder is not mandatory only for a mis-feed at the Lower Feeder
region, but please open it at this point of time for later operation.
Lower Feeder Unit
Roll Deck 1
Roll Deck 2
Roll Deck 3
3-4
Chapter 3
Troubleshooting