KIP C7800 User Manual page 29

5. Align the edge of roll media with the concerning
size guide, and then release the green lever to
fix the roll media onto the Roll Spool firmly.
6. Install the Roll Spool into the Roll Deck.
NOTE
(1) A narrower roll media (A3, 15", 12", 11") should be loaded to Roll Deck 3 (the bottom
drawer) only. Roll Deck 1 and 2 cannot recognize such roll widths.
(2) The shaft ends on both sides of Roll Spool should fit in the recess on the side plates.
2-8 Chapter 2
Size guide
Basic Operations