HP A7533A - Brocade 4Gb SAN Switch Base Release Note page 11

HP StorageWorks SAN Switch 4/32B
HP StorageWorks SAN Switch 4/64
HP StorageWorks SAN Director 4/256
HP StorageWorks SAN Switch 8/80
HP StorageWorks DC SAN Backbone Director
HP StorageWorks DC04 SAN Director
HP StorageWorks 400 Multi-protocol Router
HP StorageWorks EVA4400 Embedded Switch Module
Access Gateway was introduced with Fabric OS 5.2.1b. It allows a switch to operate in agmode ,
which allows simplified connectivity between large numbers of servers and the SAN. Access Gateway
leverages N_Port ID Virtualization (NPIV) to hide the complexity of the servers (both physical and
virtual) attached to it, while allowing easy SAN connectivity. The edge fabric switch provides all fabric
services, while Access Gateway connects to the edge switch by what appears as a host bus adapter
(HBA) connection. This architecture allows the deployment of many additional servers without requiring
a domain and the associated fabric rebuild traffic. Rebuild traffic is prevalent when switches are
powered on, added, or removed from a fabric.
For more information, see the Brocade Access Gateway Administrator's Guide, available on
www.hp.com/go/san.
Access Gateway support in non-Brocade fabrics
In addition to being supported in Brocade fabrics, Access Gateway is supported for connectivity to
the following:
McDATA switches: 2/12 (ES4300), 2/24 (ES4500), 2/16 (ES3216), 2/32 (ES3232), 2/64
(ED6064), 2/140 (M6140), M4400, Mi10K running EOS 09.07.02 with Brocade Fabric OS
6.1.0x
McDATA switches: 2/12 (ES4300), 2/24 (ES4500), 2/16 (ES3216), 2/32 (ES3232), 2/64
(ED6064), 2/140 (M6140), M4400, Mi10K running EOS 09.09.00 with Brocade Fabric OS
6.2.0x
Cisco switches: MDS 9216, MDS 9216A, MDS 9506, MDS 9509 running SAN OS 3.0(2a) with
Brocade Fabric OS 6.1.0x
Cisco switches: MDS 9216, MDS 9216A, MDS 9216i, MDS 9506, MDS 9509, MDS 9120,
MDS 9140, MDS 9124, MDS 9134 running SAN OS 3.2(3) with Brocade Fabric OS 6.2.0x
Secure Fabric OS feature not compatible with Fabric OS 6.x
and later
Fabric OS 5.3.x is the last Fabric OS version compatible with SFOS. However, all of the security
features of SFOS have been fully integrated into the base Fabric OS, starting with Fabric OS 5.3.x.
Zoning and fabric operations
When configuring zoning or other fabric-wide settings in a fabric that has products operating with
different versions of Fabric OS, HP recommends that you perform the configuration through an interface
(such as Web Tools) to a product with the most recent version of Fabric OS. Some older versions of
Fabric OS do not fully support newer hardware models, and problems may arise when configuring
settings through these older products.
HP StorageWorks Fabric OS 6.2.1 release notes
http://
11