Control Panel Messages; Phaser 6010 Printer Supply Status Messages; Phaser 6010 Printer Error Messages - Xerox 6000V_B User Manual

Troubleshooting

Control Panel Messages

This section includes:
•

Phaser 6010 Printer Supply Status Messages

•

Phaser 6010 Printer Error Messages

• Phaser 6000 Printer Status, Warning, and Error Indicators
• Phaser 6000 Printer Error Codes
• Phaser 6000 Printer Extended Error Codes
The printer uses control panel messages to indicate printer status, errors, and to provide instructions.
Phaser 6010 Printer Supply Status Messages
Status messages tell you about the status of the printer and its supplies.
Note: Xxx indicates one of the following: the Yellow Toner (Y), Cyan Toner (C), Magenta Toner (M),
Black Toner (K), a tray, or fuser. NNN indicates a numeric value.
Code/Message
Insert Xxx Cartridge
Replace Xxx Cartridge
Cartridge Error
Empty Xxx Cartridge
Low Density
Xxx Cartridge
Xxx Low
Load paper
Phaser 6010 Printer Error Messages
When the printer detects an error, it indicates the error by lighting or blinking the orange Ready light.
When the Error indicator light is activated, an error message appears on the control panel to explain
the fault. A blinking orange Ready light shows that there is an error rendering the printer inoperable.
Recovery requires restarting the printer or having the printer serviced. When the orange Ready light is
lit solidly, follow the instructions displayed on the control panel to fix the problem.
36 Phaser 6000/6010 Color Printer
User Guide
on page 36
on page 36
on page 38
on page 39
Condition/Reason/Solution
The Xxx toner cartridge is not installed correctly or is not installed. Install
the toner cartridge.
The toner cartridge has become empty.
Replace the old toner cartridge with a new one.
The wrong toner cartridge is installed or the toner cartridge is not seated
correctly. Reseat the toner cartridge or replace the cartridge with one that
meets specifications for your printer.
The expected life of the toner cartridge has been reached. Purchase a new
cartridge to replace it. For details, see
Toner is not distributed evenly in the specified cartridge. Remove and shake
the cartridge, then reinstall it.
The toner in the specified cartridge is low. Purchase a new cartridge to
replace it. For details, see
The tray is out of paper or it is the wrong size. Load the tray with the proper
size paper.
on page 37
Ordering Supplies
Ordering Supplies on page 22.
on page 22.