Performing Color Registration At The Phaser 6010 Printer - Xerox 6000V_B User Manual

• If zero (0) is not the value on the color set that is most closely aligned, circle the number that is
closest.
To determine the horizontal values:
1. In the left and right sections of the Color Registration Chart, horizontal color lines are printed in the
gaps between corresponding horizontal black lines. Each group of lines is arranged in a group
under the corresponding letters LY, LM, LC, RY, RM, and RC. Each set of lines has a corresponding
number printed to the right of it. In each color group, identify the set of lines in which color line is
most closely aligned between the corresponding black lines. Refer to the enlarged illustration on
the chart that shows how to determine the closest number.
2. Proceed to determining the vertical values described in the following procedure:
• If zero (0) is the value on the color set that is most closely aligned, you do not need to adjust
that color.
• If zero (0) is not the value on the color set that is most closely aligned, circle the number that is
closest.
3. If it is necessary to make any horizontal or vertical adjustments, proceed to
Registration Values With the Printer Setting Utility
Entering Color Registration Values With the Printer Setting Utility
Using the printer control panel, enter the values that you found in the Color Registration Correction
Chart to make adjustments.
1. On your computer, click Start > All Programs > Xerox Office Printing > Phaser 6000/6010 >
Printer Setting Utility.
2. Click the Printer Maintenance tab, then select Color Registration Adjustment from the list.
3. Use the drop-down arrow at the right side of each color to select the value for the registration
offset.
4. Repeat the previous step for each of the other registration colors.
5. After entering all of the color registration values, click the Apply New Settings button.

Performing Color Registration at the Phaser 6010 Printer

Enabling/Disabling Automatic Color Registration
Use the following procedure to enable or disable the automatic color registration adjustment feature.
1. On the printer control panel, press the Menu button.
2. Press the Down Arrow button to go to Admin Menu and then press the OK button.
3. Press the Down Arrow button to scroll to Maintenance Mode and press OK.
4. Press the Down Arrow button to scroll to Auto Regi Adjust and press OK.
5. Press the Down or Up Arrow buttons to select On or Off.
6. Do one of the following:
To enable the feature, at On press OK.
•
• To disable the feature, at Off press OK.
7. Press the Return button to return to the main menu.
on page 55.
Phaser 6000/6010 Color Printer
Troubleshooting
Entering Color
55
User Guide