Maintenance
Cleaning the Printer
This section includes:
•
General Precautions
•
Cleaning the Exterior
•
Cleaning the Interior
General Precautions
CAUTION:
solvents or aerosol cleaners. Do not pour fluids directly into any area. Use supplies
and cleaning materials only as directed in this documentation.
WARNING:
WARNING:
when doors and covers are open.
WARNING:
pressurized air-spray containers contain explosive mixtures and are not suitable for
use in electrical applications. Use of such cleaners can result in a risk of explosion
and fire.
WARNING:
cannot maintain or service any parts that are behind these covers and guards. Do
not attempt any maintenance procedure that is not described in the documentation
supplied with your printer.
To avoid damaging the printer, follow these guidelines:
•
Do not place anything on top of the printer.
•
Do not leave the covers and doors open for any length of time, especially in well-lit places. Light
exposure can damage the imaging units.
•
Do not open covers and doors during printing.
•
Do not tilt the printer while it is in use.
•
Do not touch the electrical contacts, gears, transfer belt, transfer roller, or fuser. Doing so could
damage the printer and cause the print quality to deteriorate.
•
Make sure any parts removed during cleaning are reinstalled before you plug in the printer.
16
Phaser 6000/6010 Color Printer
User Guide
on page 16
on page 17
on page 17
When cleaning your printer do not use organic or strong chemical
Keep all cleaning materials out of the reach of children.
Internal parts of the printer can be hot, especially the fuser. Use caution
Do not use pressurized air-spray cleaning aids on or in the printer. Some
Do not remove the covers or guards that are fastened with screws. You