Tcp/Ip Menu - Lexmark 16M1846 - X 658dte B/W Laser User Manual

Understanding printer menus
Menu item
Job Timeout
0‑225 seconds
Banner Page
Off
On

TCP/IP menu

Use the following menu items to view or set the TCP/IP information.
Note: This menu is available only for network models or printers attached to print servers.
This menu is available from the Network/Ports menu:
Network/Ports > Standard Network or Network <x> > Std Network Setup or Net <x> Setup > TCP/IP
Menu item
Activate
On
Off
View Hostname
IP Address
Netmask
Gateway
Enable DHCP
On
Off
Enable RARP
On
Off
Enable BOOTP
On
Off
Description
Sets the amount of time in seconds that a network print job can take before it
is canceled
Notes:
• 90 seconds is the factory default setting.
• A setting value of 0 disables the timeout.
•
If a value of 1–9 is selected, then the setting is saved as 10.
Allows the printer to print a banner page
Note: Off is the factory default setting.
Description
Activates TCP/IP
Note: On is the factory default setting.
Lets you view the current TCP/IP hostname
Note: This can be changed only from the Embedded Web Server.
Lets you view or change the current TCP/IP Address
Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
support BOOTP and RARP.
Lets you view or change the current TCP/IP Netmask
Lets you view or change the current TCP/IP Gateway
Specifies the DHCP address and parameter assignment setting
Specifies the RARP address assignment setting
Note: On is the factory default setting.
Specifies the BOOTP address assignment setting
Note: On is the factory default setting.
171