Additional Settings; Return To Default (Factory) Settings - Pioneer PRV-9000 Operating Instructions Manual

2. Press the TV button to check the remote's compatibility/functionality.
If the code is correct, the television powers ON.
3. Manipulate television controls as needed.
Button
TV
INPUT SELECT
TV VOLUME
TV CHANNEL
Note: If there are several codes for your brand of television set and the first code
fails, repeat the procedure with the next code until a code functions properly.
4.1.8

Additional Settings

Other settings available on the Initial Setup menu include the options below:
Audio input/output formats
Video input/output formats
DVD-Video language settings
Parental lock settings
Note: These settings are explained in later chapters.
The TV Control buttons on the remote (boxed area in the lower right corner of
the remote control) sends commands to the television or monitor. The
following chart provides a summary of each button's function.
Remote Button
TV <power>
INPUT SELECT
TV VOLUME +/-
TV CHANNEL +/-
4.1.9

Return to Default (Factory) Settings

During certain situations, you may wish to return the recorder to the factory
(default) settings. An example is if a Content/Parental Lock password is
entered in error or if it is forgotten; resetting the recorder erases the current
password.
Function
Press to turn television ON/OFF (standby)
Press to change video input
Use to adjust the television volume
Use to change TV channels
Function
Press to toggle the television ON and OFF.
Press to change the video input
Use to adjust the volume on the television.
Use to scroll through the active TV stations.
33
PRV-9000 Operating Instructions