Troubleshooting; General Issues; Timer Recording Issues - Pioneer PRV-9000 Operating Instructions Manual

12 T
ROUBLESHOOTING
The following sections deal with common errors and specific problems when working with
advanced recording devices such as the PRV-9000 DVD recorder.
12.1

General Issues

If you are unable to see a picture or hear the audio through the DV In/Out jack,
check the following points:
Copy-protected source material is blocked from output through the DV jack.
Check the cable between the camcorder or other DV device and the PRV-
9000.
Toggle the power (turn power Off then On again) to the DV device.
Switch the audio input.
Verify that the Linear PCM audio is set to a value other than 96 kHz.
12.2

Timer Recording Issues

Although the timer is set, the recorder fails to record under the following
conditions:
No discs is loaded
Non-recordable disc is loaded
Loaded disc is protected (see section, Protect/Unprotect an Original Title)
Loaded disc already contains the maximum number of titles (99 titles)
Entering a timer program is unavailable during the following situations:
Recording is already taking place
Clock is not set
Selected recording time has already passed
Eight timer programs already exist
If two or more programs overlap, the following actions occur:
Earlier program takes priority
As the earlier program finishes, the later timer program begins recording
PRV-9000 Operating Instructions
133