Getting Started; Initial Setup; Set The Clock - Pioneer PRV-9000 Operating Instructions Manual

4 G S
ETTING TARTED
Before plugging in the PRV-9000 for the first time, verify that all cables are properly and
firmly connected. Once all equipment is linked, following the steps below for standard
operation.
Powering ON the system:
1. Press STANDBY/ON on the remote control of from the recorder's front panel.
To return the recorder to Standby, press the button again.
2. Turn ON the TV or monitor.
3. Set the video input for the recorder according to the directions below.
(may use the remote control to set the recorder)
4.1

Initial Setup

Most of the settings and functions are
accessed using on-screen displays.
These commands are navigated with
the joystick. The joystick is very
sensitive and only requires gentle
pressure in the required direction to
move the on-screen cursor.
Use the joystick to highlight the
various menus and options then press
ENTER to select the highlighted item.
Information about the highlighted menu
or option is shown on the lower portion
of the screen.
Note: A summary of navigation controls i
listed under the HELP information.
4.1.1

Set the Clock

The clock must be set before using the timed recording function. The PRV-
9000 has an automatic clock setup feature but supports manual clock setting
as well. The following commands are based on using the remote control.
1. Press SETUP to reveal the Setup menu.
STANDBY / ON
24
PRV-9000 Operating Instructions
SETUP
ENTER / Joystick