Dv Recording Issues - Pioneer PRV-9000 Operating Instructions Manual

(transition requires approximately 30 seconds)
Programs set to start recording at the same time causes the recorder to give
priority to the program entered first
(ex: program line entry 4 and 7 start at the same time, program 4 begins
recording)
Confirmation is unavailable during the following situations:
No discs is loaded
Non-recordable disc is loaded
Loaded disc is protected (see section 7.4.12 Protecting/Unprotecting an
Original Title)
Loaded disc already contains the maximum number of titles (99 titles)
Note: If the disc is damaged, the recording may be incomplete or unsuccessful. The
Confirm field may indicate that the sequence has recorded properly (Rec OK) however
the recording can be defective.
12.3

DV Recording Issues

DV, also known as IEE 1394-1995 and i.LINK
video, data and control signals on a single cable.
One of the following messages may appear on-screen when using the DV
IN/OUT port.
No DV camera connected
The camcorder is not connected properly or the camcorder is switched OFF.
DV camera is recording
The camcorder is recording already so recording from the camcorder is
impossible.
Can't connect more than one DV camera at the same time
The recorder's DV port supports a single camcorder at any given time.
No tape in the DV camera
A tape is missing from the camcorder.
DV camera is recording or is record-paused
The camcorder is in camera-mode or record-pause mode rather than in VTR.
DV camera playback canceled
Playback unexpectedly stops due to the tape running out or some other
similar occurrence.
PRV-9000 Operating Instructions
®
, supports input/output for audio,
134