Recording From A Dv Camcorder - Pioneer DVR-5100H Operating Instructions Manual

Recording
06
3 Set up the recorder.
• Use REC MODE to set the recording quality. See
Setting the picture quality/recording time on page 49
for detailed information.
4 Press and hold the FUNCTION button on the front
panel for 3 seconds.
The recorder goes into standby and the AUTO indicator
in the front panel display lights.
The recorder will automatically switch on and start
recording when the other component comes on.
Recording stops when the external component switches
off.
• To cancel Auto Start Recording, press
ON. The indicator goes off.
• To cancel Auto Start Recording once recording has
already started, press
STOP REC.
Note
• Recording directly to DVD is not possible when using
this feature.
• You can't set Auto Start Recording when:
• the recorder is recording or in timer recording
standby.
• the HDD is not recordable.
• the HDD already contains the maximum number
of titles (99).
• If Auto Start Recording is set, it will not start if
another timer recording is in progress.
• Timer recordings take precedence over Auto Start
Recording. Auto Start Recording will stop if a timer
recording is due to start. After the timer recording
has finished, Auto Start Recording will resume.
58
En
STANDBY/
REC for 3 seconds, then

Recording from a DV camcorder

VR mode Video mode HDD
You can record from a DV camcorder connected to the
DV IN/OUT jack on the front panel of this recorder. Using
the recorder's remote, you can control both the
camcorder and this recorder.
Before recording, make sure that the audio input for the
DV IN/OUT jack is setup (see DV Input on page 102).
HDD
HOME
MENU
REV SCAN
PAUSE
Important
• The source signal must be DVC-SD format
• Some camcorders cannot be controlled using this
recorder's remote.
• If you connect a second recorder using a DV cable,
you cannot control the second unit from this one.
• You can't control this unit remotely from a
component connected to the DV IN/OUT jack.
• You can't record date and time information from DV
cassette.
• You can't record copy-protected or copy-once
material.
• During DV recording, if a part of the tape is blank, or
has copy-protected material on it, this recorder will
pause recording. Recording will restart automatically
when there is a recordable signal.
DVD
CLEAR
ENTER
RETURN
PLAY FWD SCAN
STOP
STEP/SLOW
REC MODE