Selecting An Aspect Ratio Mode
The aspect ratio modes available for your selection depends on the current input source. Use the
following table to determine which mode is available for your monitor.
ARC \ Mode
Selects the language in which the OSD menu is displayed.
Sets up the monitor so that it can only be used with the remote
control. This feature can prevent unauthorized viewing.
Avoids allowing a fixed or burn-in image to remain on the screen
for a long period of time.
Sets the power indicator on the front of the monitor to On or Off.
Turns the power saving mode on or off.
Enlarges the screen and is also used with several products to
view the screen. To use this function, it:
must be displayed with several other products.
must be in a function that can be connected to RS232C or
Select this option to return to the default factory settings.
Assigns a unique Set ID number (name assignment) to each
product when several products are connected for display.
Specify the number (1 ~ 99) using the up and down buttons and
exit. Use the assigned Set ID to individually control each product
using the Product Control Program.
Displays the serial numbers of the product.
Displays the software version.
Using the On-Screen Display Menu