Table of Contents
Advertisement
4.
Connect the AC power cord to the power connector (1) on the rear of the monitor and the other
end to an electrical outlet (2).
WARNING!
• Do not disable the power cord grounding feature. The grounding plug is an important safety
feature.
• Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
• Disconnect power from the product by unplugging the power cord from the electrical outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the
electrical outlet, grasp the cord by the plug.
To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper
workstation, setup, posture, and health and work habits for computer users, and provides important
electrical and mechanical safety information. This guide is located on the Web at
http://www.hp.com/ergo
Figure 3-19
5.
Turn on power to the monitor by pressing the front panel power button.
Figure 3-20
6.
Turn on the computer.
7.
Select an input signal.
ENWW
To reduce the risk of electric shock or damage to the equipment:
and/or on the documentation CD, if one is included with the monitor.
Connecting the Power Cord
Front Panel Power Button
Connecting to External Devices
13
Advertisement
Table of Contents
