Regulatory Options; Band Selection - Motorola MK2200-0N0SCKBWT0R - Micro Kiosk MK2200 Product Reference Manual

Regulatory Options

Use the settings to configure the country the device is in. Due to regulatory requirements (within a
Regulatory
country) a device is only allowed to use certain channels.
Regulatory Options Dialog Box
Figure C-41
Regulatory Options
Table C-25
Field
Settings
Enable 802.11d

Band Selection

The settings identify the frequency bands to scan when finding WLANs. These values refer to the
Band Selection
802.11 standard networks.
NOTE Select one band for faster access when scanning for WLANs.
Not all mobile devices support both 2.4 GHz and 5 GHz bands.
Band Selection Dialog Box
Figure C-42
Band Selection Options
Table C-26
Field
2.4GHz Band The
(802.11b and 802.11g).
5GHz Band The
Tap to save the settings or tap
Save
Select the country from the drop-down list. If you did not select the
check box, the profile country must match this setting to connect to that profile.
If you select the
Enable 802.11d
standard. It passively scans until it receives valid country information from an AP. It
limits transmit power settings based on maximums received from the AP.
Profiles using Infrastructure mode can only connect if the country selected in the
profile matches the AP country setting, or if the profile country setting is
.
Country
Profiles which use Ad-hoc mode are not 802.11d compliant.
application list includes all networks found in the 2.4 GHz band
Find WLANs
application list includes all networks found in the 5 GHz band (802.11a).
Find WLANs
to discard any changes.
X
MK2290 RF Network Configuration C - 47
Description
check box, the WLAN adapter follows the 802.11d
Description
Enable 802.11d
Allow Any