Filtering Parameters - Motorola MK2200-0N0SCKBWT0R - Micro Kiosk MK2200 Product Reference Manual

Filtering Parameters

Use the
Filter Parameters
describes these fields.
Filter Parameters Fields
Table 4-3
Menu Item
Product Group
Product
Config Group 1
Config Group 2
Location
Address Types
IP Address
Set the filtering parameters and click Apply Filter to apply the filters in RDM.
Click Clear Filter to remove the filtering parameters.
fields on the main screen to display only certain devices on the network.
RDM
Select a product group to display.
Select product model to display. See
Select an assigned configuration group to display. To set configuration groups, use the
System Configuration feature of RDM or System Menu. See
3-12.
Select a second assigned configuration group to display. To set configuration groups,
use the System Configuration feature of RDM or System Menu. See
page 3-12.
Select a device location to display. To set locations, use the System Configuration
feature of RDM or System Menu. See
Select to display devices found in
Static
Static IP Addresses on page
Manage Static IP Address list (see
Enter IP address range to filter devices within the range.
Remote Device Manager
Function
Identification on page
Identification on page
Manage Static IP Address
4-20), or Discovered to display all devices not in the
Enabling DHCP on page
4 - 9
Table 4-3
3-12.
Identification on page
Identification on
3-12.
list (see Managing
4-24).