Calibrating The Screen - Motorola MK2200-0N0SCKBWT0R - Micro Kiosk MK2200 Product Reference Manual

H - 10 MK22X0 Series MicroKiosk for CE .NET 4.2 Product Reference Guide

Calibrating the Screen

Use the
Calibration
Remove and restore power to the MK22X0 to reboot.
1.
From the
2. Windows CE Desktop
screen.
Calibration Screen
Figure H-16
NOTE To access the Calibration screen from the Windows CE Control Panel, tap Start > Settings > Control
Panel. Double-tap the Stylus icon, tap the Calibration tab, and tap the Recalibrate button. The
Calibration screen displays.
Carefully press and briefly hold the stylus tip on the center of the
3.
procedure as the target moves and stops at different locations on the screen.
The
4. Confirm Calibration Resave
settings or press the right two buttons (
Save Settings, Calibration Screen
Figure H-17
screen to align the touch screen:
window, press buttons
screen displays. Press the left two buttons (
and
C
, , and simultaneously to display the
A C D
Calibration
) to retain the existing calibration settings.
D
Calibration
screen target. Repeat the
and ) to accept the new
A B