Optional Memory - Epson H5200 - TM B/W Thermal Line Service Manual

General Description

1.4.6 Optional Memory

If you have difficulty printing complex, graphics-intensive pages of if you regularly use
downloaded fonts, you may need
controller board. The printer's controller board comes with either 0.5MB of RAM installed (for the
types of RAM chip sets are available.
Each set contains four 256K bit
Each set contains four 1 Mbit
By installing RAM chip sets, you can increase the printer's memory to a total of 6.5MB (for the
memory.
The table below describes the RAM chip combinations.
Set Installed
Chip
No chip sets
One
Two 0.5MB chip sets
Three 0.5MB chirI sets
One
One 2.OMB chip set
One 0.5MB chiD set
One
Two
Two
Two 2.OMB chip sets
One 0.5MB chip set
Three 2.OMB chip sets
On the EPL-5200/ActionLaser 1500, one 0.5 MB chip set is initially installed, so you can add
only two more optional chip sets.
to install the optional rnernory (RAM) chip sets
4,80 ns, DRAM 20-pin DIP chips
x
4,80 ns, DRAM 20-pin DIP chips
x
Table 1-18. RAM Chip Combinations
I
1.OMB
1 .5MB
I
2.5MB
I
I
4.5MB
Total RAM
1.OMB
1 .5MB
I
I
I
*
*
on this printer's
Rev. A