Listening To The Playback Sound - Sharp Aquos AN-ACS1U Operation Manual

Listening to the playback sound

POWER Power indicator
• Lit in green (unit is operating)
• Lit in red (unit is in stand-by mode)
INPUT
1
2
3
VOLUME +/-
4
5
6
7
• Reduce the volume level with VOLUME +/- before entering the
Turn on the connected equipment.
Press POWER to turn the power on.
The power indicator lights up green.
Select the source to be playback.
Main unit operation:
Press INPUT repeatedly to select a source.
(Before doing this, wait until a source is shown on the
top row of the display.)
• Each push of the button cycles through the following
settings.
(Actual operation will lag slightly behind the display.)
HDMI1
HDMI2
AUX1
AUX2
AUX3
AUX4
Remote control operation:
To select a source, press the corresponding button.
Press the play button of the connected
equipment.
Adjust the volume level with VOLUME +/-.
Enjoy surround sound or various qualities.
After use:
Press POWER to enter the stand-by mode.
The power indicator lights up red.
NOTE
stand-by mode.
Lit in green
Display (top row)
Lit in red
19