Sharp Aquos AN-ACS1U Operation Manual page 17

Connecting a Blu-ray Disc player or similar (with HDMI connector)
Use the HDMI cable for the connection.
Cables to use
HDMI cable
(supplied or commercially available)
If the cable is equipped with a protective
cap, remove it before making the
connection.
NOTE
• When connecting an HDMI CEC-enabled
AQUOS TV, Blu-ray Disc player, or similar
component, the AQUOS LINK function
can be used. (Pages 24 - 27)
• When using a commercially available HDMI
cable, it is recommended to limit cable
length to 3 m (10 ft.), to ensure stable
operation and to prevent image quality
degradation.
Connecting a DVD player, VCR, or similar (without HDMI connector)
Use optical digital cable or audio cable for the connection.
Cables to use
Optical digital cable
(supplied or commercially available)
If the cable is equipped with a protective
cap, remove it before making the
connection.
Audio cable (commercially available)
Left (white)
Right (red)
NOTE
• Connect the video output of the DVD
player or VCR directly to the TV, using
suitable A/V cable.
Blu-ray Disc player
or similar
Blu-ray Disc player
or similar
To HDMI input
connector of TV
To HDMI OUTPUT
(TO TV) connector
Rear panel
(amplifier part)
To DIGITAL AUDIO output
(optical) connector of TV
DVD player/VCR or similar
To the TV (video)
Left (white)
Right (red)
Rear panel
(amplifier part)
To HDMI output
connector
To HDMI output
connector
Insert cable until you hear a click.
To DIGITAL AUDIO INPUT (OPTICAL)
connector (AUX1)
To DIGITAL AUDIO
output (optical) connector
To AUDIO output jacks
Audio cable
Make one of
these connections
(not both)
To AUDIO INPUT
connectors
(AUX3 or AUX4)
Insert cable until you hear a click.
Connections
AQUOS LINK
A single cable carries
both video and audio
information.
To HDMI INPUT
(FROM PLAYER) connector
(HDMI 1 or HDMI 2)
AUDIO
DIGITAL
or
AUDIO
Optical
L
digital cable
R
To DIGITAL AUDIO
INPUT (OPTICAL)
connector (AUX1 or AUX2)
15