Listening To The Playback Sound From Dvd Players, Vcrs, Etc - Sharp SD-AT1000 User Manual

Listening to the playback sound from DVD players, VCRs, etc.

SD-AT1000H
ENGLISH
E-19
1
Turn on the connected equipment.
2
Press the ON/STAND-BY button to turn the power on.
3
Select the source by pressing the DIGITAL or LINE button repeat-
edly.
DIGITAL 1
DIGITAL 2
LINE 1
LINE 2
LINE 3
You can select the source directly on the remote control.
4
Press the play button of the connected equipment.
5
Adjust the volume level with the VOLUME control (see page 15).
Caution:
The unit gets warm when used for a long time. This is not a malfunction.
Note:
A safety feature automatically sets the unit to the power stand-by mode if you set the
volume level too high. If this happens, lower the volume level.
03/3/14 SD-AT1000H_SEEG_E.fm
TINSZ0943AWZZ