Sharp Aquos AN-ACS1U Operation Manual page 28

1bit theater rack system
Table of Contents

Advertisement

AQUOS LINK
Reproducing AQUOS TV sound through the AQUOS AUDIO system
Point towards
AQUOS TV
Open the
flip cover
26
• Use the remote control of the AQUOS TV and point it
towards the AQUOS TV for operation.
1
Press POWER.
• Along with the AQUOS TV, power to the AQUOS
AUDIO system is turned on automatically.
• The input source of the AQUOS AUDIO system is
automatically set to "AUX1".
2
Use VOLUME +/- to adjust the volume.
• The volume level is displayed on the AQUOS TV and
on the AQUOS AUDIO system.
3
Try out various preset sound modes.
1. Press OPTION.
• The AQUOS LINK Menu screen appears.
2. Use a/b to select "Sound mode change" and press
ENTER.
• Each push of ENTER cycles through the following
settings.
STANDARD
MOVIE
NIGHT
SPORTS
3. Press OPTION.
• The AQUOS LINK Menu screen disappears.
4
After use:
Press POWER to enter the stand-by mode.
• Along with the AQUOS TV, power to the AQUOS
AUDIO system is turned off automatically.
To switch the sound of SAP broadcasts
Press AUDIO repeatedly to select the desired audio mode.
• For details, please see the manual of the TV.
Muting:
The sound is muted temporarily when pressing MUTE on the
remote control.
To restore the sound, press the button again or press
VOLUME +/-.
NOTE
• To reproduce the sound of another component connected to
AUX2 - AUX4, press INPUT on the AQUOS AUDIO system to
change the setting. (Page 19)
Power on/off, volume adjustment, mute, and other functions can
be linked to the AQUOS TV.
• When an AQUOS LINK-enabled Blu-ray Disc player connected to
HDMI 1 or HDMI 2 is used, the input setting of the AQUOS AUDIO
system and the AQUOS TV is automatically selected as required.
(Operating a menu or similar will also have the same effect.)
• When two AQUOS LINK-enabled players are connected to the
AQUOS AUDIO system, the most recently operated component
will be automatically selected.
• To use the AQUOS TV remote control for selecting one of two AQUOS
LINK-enabled players connected to HDMI 1 and HDMI 2, bring up the
AQUOS LINK MENU screen and use the "Model select" option. Each
push of ENTER cycles through the connected components.
• The AQUOS TV remote control is not supplied with this product.
• The AQUOS TV remote control may be different depending on the model.
NEWS
MUSIC
JAZZ
LIVE
POPS
ROCK
CLASSIC

Advertisement

Table of Contents
loading

Table of Contents