Sharp Aquos AN-ACS1U Operation Manual page 10

Controls and indicators
Control part
POWER
• Switches the unit between on and off (stand-by).
Remote sensor
Page 17
• Point the remote control at
this sensor.
INPUT
• Press this button to select the input source. Each
push of the button cycles through the following
settings.
HDMI1 (INPUT)
AUX4
AUDIO INPUT
(ANALOG)
AUX3
Display part
Various information about the operating condition of the unit is shown here, including the input source, volume level setting,
sound mode, subwoofer level setting, mute, etc.
Display top row (Input source)
• Shows the currently selected input source.
Display bottom row (Volume/sound mode)
• Shows information about sound mode, volume level, Dolby Virtual
Speaker, Audistry, and other settings.
8
Page 16
Power indicator
• Lit in green: unit is operating
• Lit in red: unit is in stand-by mode
Page 19
HDMI2 (INPUT)
DIGITAL
AUDIO INPUT
(OPTICAL)
Page 19
Pages 16•19
AUX1
AUX2
Depending on the input signal type and selected settings, one or
more of the following indicators lights up.
• Shows the input signal type.
,
• Lights up when Dolby ProLogic II is active.
• Lights up when Dolby Virtual Speaker mode
is active.
• Lights up when Audistry mode is active.
......SOUND SPACE
......NATURAL BASS
......INTELLIGENT VOLUME
......MONO TO STEREO
Pages 18-23
VOLUME +/-
Page 18
• Turns up/down the volume.
Page 20
,
Page 20
Page 22
Page 23