Epson Stylus Pro 7890 User Manual page 94

Epson Stylus Pro 9890/9908/7890/7908
Error messages
INK CARTRIDGE
NON-GENUINE CARTRIDGE!
QUALITY OF NON-GENUINE
INK MAY VARY
NON-GENUINE CARTRIDGE
MAY NOT PERFORM AT
OPTIMUM. CONTINUE?
DECLINE
ACCEPT
INK CARTRIDGE ERROR
PLEASE INSTALL THE CORRECT
CARTRIDGE
NOZZLE CLOG DETECTED
NOT ENOUGH INK
CONTINUE CLEANING?
YES (RECOMMENDED)
NO
NOZZLE CLOG DETECTED
NOT ENOUGH EMPTY SPACE
IN MAINT TANK
CONTINUE CLEANING?
YES (RECOMMENDED)
NO
CLOGGED NOZZLES DETECTED
CLEANING RECOMMENDED
Error messages related to the options
Error messages
TAKE-UP DISCONNECTED
SET AUTO TAKE-UP REEL SYSTEM
IN PRINTER AND RESTART THE
PRINTER
TAKE-UP DISCONNECTED
AUTO TAKE-UP REEL UNIT IS
DISCONNECTED
DO YOU CONTINUE?
NO
YES
TAKE-UP ERROR
CHECK THE STATUS OF AUTO
TAKE-UP REEL UNIT AND
RESTART THE PRINTER
User's Guide
Problem Solver
Description
Non-genuine ink
cartridge is installed.
An ink cartridge that
cannot be used with
this printer is installed.
There is not enough ink
to perform cleaning.
There is not enough
space in the
maintenance tank to
perform cleaning.
Print head nozzles are
clogged.
Description
Auto Take-up Reel Unit is
not correctly installed in
the printer.
Auto Take-up Reel Unit is
not correctly installed in
the printer.
The roll paper is not set
to the Auto Take-up Reel
Unit properly.
94
What to do
Select DECLINE to replace the ink cartridge with a
genuine Epson ink cartridge. Selecting ACCEPT
may void EPSON's warranty.
See "About ink cartridges" on page 68
See "Replacing ink cartridges" on page 69
Remove the ink cartridge, and install an ink
cartridge that can be used with this printer.
See "About ink cartridges" on page 68
See "Replacing ink cartridges" on page 69
By clicking YES, the message to replace the ink
cartridge appears. Replace the ink cartridge with
a new one to continue cleaning.
See "Replacing Ink Cartridges" on page 66
By clicking YES, the message to replace the
maintenance tank appears. Replace the
maintenance tank with a new one to continue
cleaning.
See "Replacing the Maintenance Tank" on
page 71
Perform head cleaning to remove any clogs. This
message continues to be displayed until the
clogged nozzles have been cleared, but it is
removed when a check pattern is printed.
Printing is possible while the message is displayed.
See "Head cleaning" on page 78
What to do
Turn the printer off, and then install the Auto
Take-up Reel Unit properly.
See "Using Auto Take-up Reel Unit (For
Epson Stylus Pro 9890/9908 only)" on page 46
Select NO, and turn the printer off, and then
install the Auto Take-up Reel Unit properly. If
you select YES, the paper is ejected without
using the Auto Take-up Reel Unit.
See "Using Auto Take-up Reel Unit (For
Epson Stylus Pro 9890/9908 only)" on page 46
Press the button to release the paper
presser, and then set the roll paper to the Auto
Take-up Reel Unit properly.
See "Using Auto Take-up Reel Unit (For
Epson Stylus Pro 9890/9908 only)" on page 46