When Using This Product - Epson Stylus Pro 7890 User Manual

24/44-inch professional printer
Hide thumbs Also See for Stylus Pro 7890:
Table of Contents

Advertisement

Epson Stylus Pro 9890/9908/7890/7908
❏ Do not use a damaged or frayed power cord.
❏ If you use an extension cord with this
product, make sure the total ampere rating of
the devices plugged into the extension cord
does not exceed the cord's ampere rating.
Also, make sure the total ampere rating of all
devices plugged into the wall outlet does not
exceed the wall outlet's ampere rating.
❏ Do not attempt to service this product
yourself.
❏ Unplug this product and refer servicing to
qualified service personnel under the
following conditions:
The power cord or plug is damaged; liquid
has entered the product; the product has been
dropped or the cabinet damaged; the product
does not operate normally or exhibits a
distinct change in performance.
❏ If you plan to use the printer in Germany,
observe the following:
To provide adequate short-circuit protection
and over-current protection for this printer,
the building installation must be protected by
a 10 or 16 amp circuit breaker.
❏ If damage occurs to the plug, replace the cord
set or consult a qualified electrician. If there
are fuses in the plug, make sure you replace
them with fuses of the correct size and rating.
User's Guide
Safety Instructions

When using this product

❏ Do not put your hand inside this product or
touch the ink cartridges during printing.
❏ Do not move the print heads by hand;
otherwise you may damage this product.
❏ Always turn the product off using the Power
button on the control panel. When this button
is pressed, the Power light flashes briefly then
goes off. Do not unplug the power cord or
turn off the product until the Power light
stops flashing.
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus pro 9890Stylus pro 7908Stylus pro 9908

Table of Contents