Epson Stylus Pro 9890/9908/7890/7908
Setting Procedures for Printing
Making Settings in Windows
A
When the printer driver's Main screen is
displayed, you can configure various
settings required for printing such as
Media Type, Source, Page Size.
See "Print Settings" on page 54
B
Select Borderless, and then click
Expansion.
User's Guide
Printing Varieties
C
Select Auto Expand or Retain Size as the
Method of Enlargement. If you select Auto
Expand, set how much of the image goes
beyond the edge of the paper as shown
below.
Max
Standard
Min
Note:
Moving the slider towards Min decreases the
image enlargement ratio. Therefore, some
margins may appear at the edges of the paper
depending on the paper and printing
environment.
D
When printing on roll paper, click Roll
Paper Option, and select the Auto Cut
setting.
See "About Roll Paper Cutting" on page
132
E
Check other settings, and then start
printing.
Making Settings for Mac OS X
A
Open the Print screen and select the paper
size from the Paper Size option, and then
select a borderless printing method.
See "Printing procedures (Mac OS X)"
on page 55
The selections for borderless printing
methods are displayed as shown below.
133
: 3 mm for left and 5 mm for right
(the image shifts 1 mm to the
right)
: 3 mm for left and right
: 1.5 mm for left and right