Epson Stylus Pro 7890 User Manual page 40

Epson Stylus Pro 9890/9908/7890/7908
E
Load the sheet into the paper insertion slot.
F
Make sure that the right and bottom edges
of the sheet are straight and in line with the
set line.
If you have difficulty adjusting the thick
paper, adjust the paper suction by pressing
the or button.
G
Press the button.
After a few seconds, the paper moves to the
start position. If you press the
it moves at once.
User's Guide
Paper Handling
H
If ARE THESE SETTINGS OK? appears on the
LCD panel, press the
select NO and then press the
the media type and paper remaining, and
then press the
The previous setting appears on the LCD
panel. If the media type and paper
remaining are correct, select YES and then
press the
I
If you use the paper basket, set it in the
forward position.
See "Using the paper basket and paper
guides" on page 42
button,
40
or button to
button. Set
button to set the media.
button.