Transporting The Printer; Setting Up The Printer After Transporting - Epson Stylus Pro 7890 User Manual

24/44-inch professional printer
Hide thumbs Also See for Stylus Pro 7890:
Table of Contents

Advertisement

Epson Stylus Pro 9890/9908/7890/7908

Transporting the printer

When you transport the printer, be sure to repack
the printer using the original box and packing
materials.
Caution:
c
❏ When moving or transporting the printer,
keep it flat. Do not tilt it, stand it on end, or
turn it upside down. Doing so may cause the
ink to leak inside the printer. Also, proper
operation of the printer after moving or
transportation cannot be guaranteed.
❏ When transporting the printer, repack the
printer using the original box and packing
materials to protect it from shock and
vibration.
❏ When moving or transporting this product
equipped with the stand on an uneven
surface, lift the printer and carry it.
❏ When moving or transporting this product
equipped with the stand, check all the screws
for proper tightness on the stand afterward.
User's Guide
Maintenance
Setting up the printer after
transporting
The steps you need to take to set up the printer
after transporting it are almost identical to the
steps carried out the first time you set up the
printer. When you set up the printer again, refer
to the Setup Guide.
A
Make sure that the place is proper.
See "Choosing a place for the printer" in
the Setup Guide
B
Plug in the power cable to the electrical
outlet, and turn on the printer.
See "Setting up" in the Setup Guide
C
Perform a nozzle check to see if there are
any missing dots.
See "Nozzle check" on page 76
D
Perform the print head alignment to ensure
print quality.
See "Print head alignment" on page 82
88

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus pro 9890Stylus pro 7908Stylus pro 9908

Table of Contents