Maintenance Mode; Maintenance Mode List - Epson Stylus Pro 7890 User Manual

Epson Stylus Pro 9890/9908/7890/7908

Maintenance Mode

You can change the language or unit used on the
display or return all the setting values to their
factory default.
A
Turn off the printer by pressing the
button.
B
Press both the
button at the same time to turn on the
printer.
Refer to the "Maintenance mode list" on the
right for details.
The setting procedures are the same as
those for the Menu mode.
See "Using the Menu mode" on page 16
C
To exit the Maintenance mode, press the
button to turn off the printer.
User's Guide
The Control Panel
button and the

Maintenance mode list

Item Parameter
LANGUAGE JAPANESE
ENGLISH
FRENCH
ITALIAN
GERMAN
PORTUGUE
SPANISH
DUTCH
KOREAN
CHINESE
LENGTH UNITS METRIC
FEET/INCH
TEMPERATURE °C
UNITS
F
ROLL PAPER 1 - 5
TENSION
SS CLEANING EXECUTE
DEFAULT EXECUTE
PANEL
AUTO 1 - 3
CLEANING
TIMES
CUSTOM 0 - 255
29
Explanation
You can select
the language to
be displayed on
the LCD panel.
You can select a
unit of
measurement to
use to display
length.
You can select
the unit of
temperature
displayed on the
LCD panel.
You can change
the maximum
value of Roll
Paper Tension.
You can perform
ultrasonic head
cleaning.
You can set all
setting values you
made in the
Menu mode to
their factory set
value.
The number of
times to perform
auto cleaning
when a clog was
detected after
performing an
auto nozzle
check.
You can make
custom settings.