Expansion Slot; Installing An Expansion Card To The Riser Card Bracket - Asus RS920-E7/RS8 User Manual

2.5

Expansion slot

2.5.1

Installing an expansion card to the riser card bracket

The barebone server comes with a riser card bracket. You need to remove the
bracket if you want to install PCI Express x16 expansion cards.
To install a PCI Express x16 card
1. Loosen the screws of the riser card
bracket.
2. Place the riser card bracket on a
flat and stable surface, and then
remove the screw from the slot bay.
3. Loosen the screw of rear end
bracket and remove it.
4. Install a PCI Express x16 card to
the bracket as shown, and then
secure the card with a screw.
ASUS RS920-E7/RS8; RS926-E7/RS8
PCI Express x16 slot
2-15