Creating A Raid Set - Asus RS920-E7/RS8 User Manual

6.3.1

Creating a RAID set

To create a RAID set
From the utility main menu, select 1. Create RAID Volume and press
1.
<Enter>. The following screen appears.
Intel(R) Rapid Storage Technology enterprise - SCU Option ROM - 3.0.0.1104
[↑↓]Change
2. Enter a name for the RAID set and press <Enter>.
When the RAID Level item is selected, press the up/down arrow key to select
3.
a RAID level to create, and then press <Enter>.
When the Disks item is selected, press <Enter> to select the hard disk drives
4.
you want to include in the RAID set. The SELECT DISKS screen appears.
Port Drive Model
0 ST3300656SS
1 ST3300656SS
2 ST3300656SS
3 ST3300656SS
[ ↑↓ ]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done
5. Use the up/down arrow key to select a drive, and then press <Space>
to select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
6-26
Copyright(C) 2003-11 Intel Corporation.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Enter a unique volume name that has no special characters and is
[TAB]-Next
[ SELECT DISKS ]
Serial #
HWAS0000991753TR
37VN00009846RAJ1
397600009846UEDY
GWC50000991756G6
Select 2 to 6 disks to use in creating the volume.
[ CREATE VOLUME MENU
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0 GB
Create Volume
[ HELP ]
16 characters or less.
[ESC]-Previous Menu
Size Status
279.3GB Non-RAID Disk
279.3GB Non-RAID Disk
279.3GB Non-RAID Disk
279.3GB Non-RAID Disk
All Rights Reserved.
]
[ENTER]-Select
Chapter 6: RAID configuration