Asus RS920-E7/RS8 User Manual page 92

Memory Configuration
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Compatibility RID
Memory Configuration
Total Memory
Current Memory Mode
Currently Memory Speed
Mirroring
Sparing
Memory Mode
DDR Speed
Channel Interleaving
Rank Interleaving
Patrol Scrub
Demand Scrub
Data Scrambling
Device Tagging
Thermal Throtting
Enable High Temp
Allow 2x Refresh
Altitude
Memory HOT Sensor support
DIMM Information
Version 2.15.1219. Copyright (C) 2011 American Megatrends, Inc.
Compatibility RID [Enabled]
Support for compatibility revision ID (CRID) functionality mentioned in Sandybridge
BIOS spec. Configuration options: [Enabled] [Disabled]
Memory Mode [Independent]
Select the mode for memory initializaton.
Configuration options: [Independent] [Mirroring] [Lock Step] [Sparing]
DDR Speed [Auto]
Force DDR speed.
Configuration options: [Auto] [Force DDR3 800] [Force DDR3 1066] [Force DDR3
1333] [Force DDR3 1600] [Force DDR3 1866]
Channel Interleaving [Auto]
Select different channel interleaving setting.
Configuration options: [Auto] [1 Way] [2 Way] [3 Way] [4 Way]
Rank Interleaving [Auto]
Select different rank interleaving setting.
Configuration options: [Auto] [1 Way] [2 Way] [4 Way] [8 Way]
5-16
[Enabled]
Support for compatibility
Revision ID(CRID)
Functionality mentioned in
Sandybridge bios spec.
2048 MB (DDR3)
Independent
1333 MHz
Supported
Not Possible
[Independent]
[Auto]
[Auto]
[Auto]
[Disabled]
[Enabled]
→←: Select Screen
[Enabled]
↑↓:
[Disabled]
Enter: Select Item
[CLTT]
+/-: Change Opt.
[Disabled]
F1: General Help
[Enabled]
F2: Previous Values
[300 M]
F5: Optimized Defaults
[Enabled]
F10: Save & Exit
ESC: Exit
Select Item
Chapter 5: BIOS setup