Lan Controller Setting (3-Pin Lan_Sw1); Me Firmware Force Recovery Setting (3-Pin Me_Rcvr1) - Asus RS920-E7/RS8 User Manual

4.

LAN controller setting (3-pin LAN_SW1)

These jumpers allow you to enable or disable the onboard Intel
LAN controllers. Set to pins 1-2 to activate the Gigabit LAN feature.
5. ME firmware force recovery setting (3-pin ME_RCVR1)
This jumper allows you to force Intel Management Engine (ME) boot from
recovery mode when ME become corrupted.
4-6
®
Chapter 4: Motherboard information
i350 Gigabit