Bupdater Utility - Asus RS920-E7/RS8 User Manual

2u rackmount server
Hide thumbs Also See for RS920-E7/RS8:
Table of Contents

Advertisement

Ensure to load the BIOS default settings to ensure system compatibility and stability.
Press <F5> and select Yes to load the BIOS default settings.
5.1.3

BUPDATER utility

The succeeding BIOS screens are for reference only. The actual BIOS screen
displays may not be the same as shown.
The BUPDATER utility allows you to update the BIOS file in the DOS environment
using a bootable USB flash disk drive with the updated BIOS file.
Updating the BIOS file
To update the BIOS file using the BUPDATER utility:
1.
Visit the ASUS website at www.asus.com and download the latest BIOS file
for the motherboard. Save the BIOS file to a bootable USB flash disk drive.
2.
Copy the BUPDATER utility (BUPDATER.exe) from the ASUS support
website at support.asus.com to the bootable USB flash disk drive you created
earlier.
3.
Boot the system in DOS mode, then at the prompt, type:
BUPDATER /i[filename].ROM
where [filename] is the latest or the original BIOS file on the bootable USB
flash disk drive, then press <Enter>.
A:\>BUPDATER /i[file name].ROM
5-4
This function can support devices such as a USB flash disk with FAT 32/16
format and single partition only.
DO NOT shut down or reset the system while updating the BIOS to prevent
system boot failure!
Chapter 5: BIOS setup

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rs926-e7/rs8

Table of Contents