Asus RS920-E7/RS8 User Manual page 130

The ARRAY SELECTION MENU displays the available drives connected to
2.
the SATA ports. Use the up/down arrow keys to select the drives you want to
include in the RAID set, and then press <Space>. When selected, the drive
indicator changes from READY to ONLIN A[X]-[Y], where X is the array
number, and Y is the drive number.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 2 DISK
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Virtual Drives,F4-HSP
•
•
•
3. Select all the drives required for the RAID set, and then press <F10> to
configure array setting.
4. Press <Space> to select the configurable array.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Cursor Keys, SPACE-(De)Select F2-ChIdInfo F3-SlotInfo F10-Configure Esc-Quit
6-6
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version
Easy Configuration - ARRAY SELECTION MENU
74.74GB HDS728080PLA380
The information of the selected hard disk drive displays at the bottom of the
screen.
You need at least two identical hard disk drives when creating a RAID 1 set.
You need at least four identical hard disk drives when creating a RAID 10
set.
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version
Easy Configuration - ARRAY SELECTION MENU
A-0
SPAN-1
A.10.09231523R
PORT #
0 ONLIN A00-00
1
ONLIN A00-01
2
READY
READY
3
A.10.09231523R
Select Configurable Array(s)
PORT #
0
DNLIN A00-00
1
DNLIN A00-01
05.01C05
Chapter 6: RAID configuration