Asus RS920-E7/RS8 User Manual page 149

2u rackmount server
Hide thumbs Also See for RS920-E7/RS8:
Table of Contents

Advertisement

To enter the Intel
Rapid Storage Technology enterprise SCU option ROM / SATA
®
option ROM utility:
1.
Install all the Serial ATA hard disk drives.
2.
Turn on the system.
3.
During POST, press <Ctrl+I> to display the utility main menu.
Intel(R) Rapid Storage Technology enterprise - SCU Option ROM - 3.0.0.1104
Copyright(C) 2003-11 Intel Corporation.
1. Create RAID Volume
2. Delete RAID Volume
RAID Volumes:
None defined.
Physical Disks:
ID
Drive Model
0
ST3300656SS
1
ST3300656SS
2
ST3300656SS
3
ST3300656SS
[↑↓]-Select
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
The RAID BIOS setup screThe RAID BIOS setup screens shown in this section
are for reference only and may not exactly match the items on your screen.
The utility supports maximum four hard disk drives for RAID configuration.
ASUS RS920-E7/RS8; RS926-E7/RS8
[
MAIN MENU
]
3. Reset Disks to Non-RAID
4. Exit
[
DISK/VOLUME INFORMATION
Serial #
HWAS0000991753TR
37VN00009846RAJ1
397600009846UEDY
GWC50000991756G6
[ESC]-Exit
All Rights Reserved.
]
Size Type/Status(Vol ID)
279.3GB
Non-RAID Disk
279.3GB
Non-RAID Disk
279.3GB
Non-RAID Disk
279.3GB
Non-RAID Disk
[ENTER]-Select Menu
6-25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rs926-e7/rs8

Table of Contents