Commands Descriptions; Pjl Output Tray; Pcl Output Tray; Ps Output Tray - Brother HL-1070 - B/W Laser Printer Technical Reference Manual

2001/10/02
3.1.

Commands Descriptions

3.1.1.
Format
@PJL SET/DEFAULT OUTBIN=TrayName
Parameter
TrayName*
FINISHER:
Default = ALLSTACKER
Explanation
This command selects the Finisher/Stapler unit.
This command is ignored when the Finisher/Stapler unit is not available.
The difference between the SET and DEFAULT selection and the effective period of this setting follow the
PJL specifications.
3.1.2.
Command
Esc&l#G (27)(38)(108)#(71)
Parameter
# denotes the output tray.
100: Select the Finisher/Stapler unit.
Default = 1
Explanation
This command selects the Finisher/Stapler unit.
This command is ignored when the Finisher/Stapler unit is not available.
The PJL OUTBIN command is ignored when this command is executed.
3.1.3.
Command
<</BROutbinMode #>>setpagedevice
Parameter
#
3:
Default = 0
Explanation
This command selects the Finisher/Stapler unit.
This command is ignored when the Finisher/Stapler unit is not available.
<Example>
<</BROutbinMode 3>>setpagedevice
APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 4

PJL output tray

Select the tray of the Finisher/Stapler unit

PCL output tray

PS output tray

Select the Finisher/Stapler unit.
<1Bh><38h><6ch>#<47h>