Introduction - Brother HL-1070 - B/W Laser Printer Technical Reference Manual

2001/10/02
1.

INTRODUCTION

The Flash/Card Commands described in this chapter are applicable to the HL-1270N / 1470N / 1660e / 2060
/ 2400C / 2400Ce / 3400CN / 1650 / 1670N / 2460 / 3260N printers only. The following types of devices can
be used for the printers;
1) Flash memory card (HL-1660e / 2060 / 2400C / 2400Ce / 3400CN)
2) ATA flash memory card (HL-1660e / 2060 / 2400C / 2400Ce / 3400CN / 2460 / 3260N)
3) Internal flash memory (HL-1270N / 1470N / 1650 / 1670N)
4) Internal HDD (HL-2400Ce / 3400CN / 2460 / 3260N)
Both command and control panel operations allow you to read / write data onto these devices. The
PostScript emulation recognizes device types 2), 3)and 4) as a hard disk and the PostScript file operator
allows you to read / write data on these devices.
For the HL-1270N / 1470N / 1650 / 1670N printer, please note that the part of the internal printer flash
memory can be used as though it was a HDD.
APPENDIX B - FLASH/ PCMCIA CARD COMMANDS - 3