Character Plot Instructions - Brother HL-1070 - B/W Laser Printer Technical Reference Manual

2001/10/02
XT - X-axis tick
XT [;]
Plots vertical tick marks as specified by the TL instruction from the current position.
After plotting, the cursor returns to its point of origin.
Plotting is performed whether the pen is up or down.
YT - Y-axis tick
YT [;]
Plots horizontal tick marks as specified by the TL instruction from the current position.
After plotting, the cursor returns to its point of origin.
Plotting is performed whether the pen is up or down.
10 '*** XTYTEX ***
20 LPRINT "IN;PA300,279;SP2;PD";
30 LPRINT "PR1300,0;XT;PR1300,0;XT;PU;"
40 END
PT - Pen thickness select
PT [d] [;]
d : Fill line interval (mm)
Sets the line interval when filling in with solid lines.
The value for d is a clamped number from 0.0000 to 5.0000.
The default value (0.3 mm) is used when d is omitted.
3.6.

Character Plot Instructions

Instruction
CS
CA
SS
SA
DT
LB
DI
DR
CP
SI
SR
SL
UC
CS - Standard character set
CS n[;]
n ; Character set number(*)
Specifies the standard character set.
When the parameter field is omitted, character set 0 is specified.
The value for n is a clamped integer number in the range of 0 to 4, 6 to 7, 9 or 30 to 39.
CA - Alternate character set
CA n[;]
n ; Character set number (*)
Specifies the alternate character set.
When the parameter field is omitted, character set 0 is specified.
The value for n is a clamped integer number in the range of 0 to 4, 6 to 7, 9 or 30 to 39.
Function
Standard Set Definition
Alternate Set Definition
Select Standard Font
Select Alternate Font
Define Label Terminator
Define Label
Absolute Direction
Relative Direction
Character Plot
Set Absolute Character Size
Set Relative Character Size
Set Character Slant
User-defined Character
CHAPTER 9 HP-GL - 20