Introduction; General Specification; Command Reference List - Brother HL-1070 - B/W Laser Printer Technical Reference Manual

Technical reference

Hide thumbs Also See for HL-1070 - B/W Laser Printer:

Table of Contents

INTRODUCTION

This manual covers the general specifications and the command reference list of the FS-5050 Finisher/Stapler

units, which are optionally installed onto the HL-3260 printer.

The Finisher/Stapler unit is an option for the HL-3260 printer.

This section describes the specific commands as listed below used to support the functions of the

Finisher/Stapler unit.

1) PJL output tray

2) PCL output tray

3) PS output tray

4) PJL staple on/off

5) PS staple on/off

6) PJL job offset on/off

7) PS job offset on/off

8) PCL job separate

For the details on each command, refer to the following sections.

APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 3

Printed pages can be sorted or stapled.

Table of Contents