Bluetooth Module Cable - HP Elitebook 2540p Maintenance And Service Manual

3.
Reverse this procedure to install the speaker.

Bluetooth module cable

NOTE:
Before removing the Bluetooth module cable, follow these steps:
1.
2.
3.
4.
92 Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com
Remove the speaker (4) from the base enclosure.
The Bluetooth module cable is included in the Cable Kit, spare part number 598766-001.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the battery (see Battery on page
a. Memory module compartment cover (see
b. Wireless module compartment cover (see
c. Switch cover and keyboard (see
d. Display assembly (see
e. Top cover (see Top cover on page
manuals search engine
48), and then remove the following components:
Expansion memory module on page
WLAN module on page
Switch cover and keyboard on page
Display assembly on page
85)
57)
69)
76)
52)
ENWW